off Grid 3kw 5kw Wind Solar Hybrid System Vertical Wind Turbine Generator

• Customization: Available
• After-sales Service: One Year Warranty for Lifelong Maintenance
• Warranty: One Year Warranty for Lifelong Maintenance
• Model NO.: B-19-2
• Number of Blade: Three Blade
• Rotating Shaft: Horizontal
• Power: 10-100kW
• Certification: CE, ISO
• Pre-Sales Project Design: Yes
• Application: on / off Grid
• Output Voltage: Can Be Customized
• Surface Trearment: Galvanized,Spray Pained
• Blade Material: Reinforced Glass Steel
• Transport Package: Wooden Pallets or Upon on Customers′ Requests
• Specification: 2100*900*900mm or Customized size
• Trademark: chengmingyuan
• Origin: Shandong Qingdao
• HS Code: 8502310000
• Production Capacity: 600000pieces/Year

Product Description

Product Description

1: Wind solar complementary power generation
Wind solar complementary power generation system is a new type of energy generation system that utilizes the complementarity of wind and solar resources and has high cost-effectiveness. This system utilizes wind turbines and solar cell arrays, and achieves all-weather power generation through intelligent controllers, battery packs, multifunctional inverters, and other equipment. The advantage of the wind solar complementary power generation system is that it generates electricity from wind energy at night and on cloudy and rainy days when there is no sunlight, and from solar energy on sunny days. In situations where both wind and sun are present, the two systems work simultaneously, achieving a more economical, scientific, and practical power generation method than using only wind turbines and solar energy. This system is suitable for remote areas, independent power systems, or as part of distributed power generation systems, such as road lighting, agriculture, animal husbandry, planting, animal husbandry, tourism, advertising, service industry, ports, mountainous areas, forest areas, railways, petroleum,communication relay stations, and other fields. twelve
The wind solar complementary control system is an important component of the wind solar complementary power generation system, responsible for managing the power supply priority sequence of loads, preventing overcharging or overdischarging of batteries, and controlling the start stop of diesel generator sets. When wind power, solar photovoltaic power, and batteries cannot meet the load demand, diesel generator sets start to charge the batteries while supplying power to the load. When wind and solar photovoltaic power generation exceeds the load demand or when the battery is fully charged, the diesel engine stops running. four
The promotion and application of wind solar complementary power generation systems not only solve the power supply problem for residents in remote areas, but also create opportunities for the promotion of new energy products, demonstrating broad prospects. With the continuous advancement of technology and the reduction of costs, the position of wind solar complementary power generation systems in the future energy structure will become increasingly important.
2: Power generation mode
The wind solar complementary power station adopts a wind solar complementary power generation system. The wind solar complementary power station system mainly consists of wind turbines, solar cell arrays, intelligent controllers, battery packs, multifunctional inverters, cables, supports, and auxiliary components to form a power generation system that supplies electricity to the load. At night and on cloudy and rainy days when there is no sunlight, wind energy is used to generate electricity, while on sunny days, solar energy is used to generate electricity. In situations where both wind and sun are present, both of them work simultaneously to achieve all-weather power generation, which is more economical, scientific, and practical than using wind turbines and solar energy alone. Suitable for road lighting, agriculture, animal husbandry, planting, animal husbandry, tourism, advertising, service industry, ports, mountainous areas, forest areas, railways, petroleum,communication relay stations, highway and railway signal stations, geological exploration and field investigation workstations, and other areas with inconvenient electricity consumption.
3: Technical composition
(1) Power generation section: composed of one or several wind turbines and a matrix of solar panels, completing wind power generation; The conversion between light and electricity, and the automatic charging of the battery pack is completed through the charging controller and DC center.
(2). Storage part: composed of multiple batteries, it completes all the electrical energy storage tasks of the system.
(3). Charging controller and DC center: composed of wind and solar charging controllers, DC center, control cabinet, lightning arrester, etc. Complete the system
4: Application scenarios:
Wind solar energy storage integration refers to the use of wind generated power in windy environments to store it in batteries. In windless weather, solar panels collect energy through sunlight and store it in batteries for 7-15 days. Application scenarios:
The wind solar complementary power generation system is an economically practical power station designed for communication base stations, microwave stations, border outposts, remote pastoral areas, areas without electricity, and islands. It is built using the abundant wind and solar energy in the local area, away from the power grid, in a state of no electricity, with sparse population, low electricity load, and inconvenient transportation.
Solution:
The wind solar complementary power generation system solution is mainly used for power supply in road lighting, agriculture, animal husbandry, planting, animal husbandry, tourism, advertising, service industry, ports, mountainous areas, forest areas, railways, petroleum, communication relay stations, highway and railway signal stations, geological exploration and field investigation workstations, and other areas with inconvenient electricity consumption.

 

Product Description

                                               solar                                battery                                                wind turbine
                         inverter                                               controller                                PV cable & MC4 

The photovoltaic power generation part uses the photovoltaic effect of the solar panel to convert light energy into electrical energy, then charges the battery, and converts direct current into alternating current through the inverter to supply power to the load.

 

The wind power generation part is to use the wind turbine to convert the wind energy into mechanical energy, convert the mechanical energy into electrical energy through the wind generator, then charge the battery through the controller, and supply power to the load through the inverter.

 

Model	EL-EX-800W	EL-EX-1000W	EL-EX-3000W	EL-EX-5000W
Rated power	800W	1000W	3000W	5000W
Maximum power	850W	1500W	3500W	5500W
Rated voltage	12V/24V	12V/24V	12V/24V	12V/24V
Start- up wind  speed	1.3m /s	1.3m /s	1.3m /s	1.3m /s
Rated wind speed	10m/s	10m/s	10m/s	10m/s
Cut- in wind speed	2.5m/s	2.5m/s	2.5m/s	2.5m/s
Number of blades	3 pieces
Body material	glass/ basalt
Generator	Coreless Disc Generator
Control system	electromagnetic brake
Yaw mode	automatic windoward angle
Lubrication mode	self lubrication
Tower form	guyed tower/ independent tower
Working  temperature	-25~+45ºC
Kindly Reminder: * The above system configurations are for reference only. * We will design the system solution based on your installation conditions and actual requirements.

Horizontal Axis
Model ( Horizontal Axis)	DT-600	DT-800	DT-1K	DT-2K	DT-3K	DT-5K
Rated power(W)	600	800	1000	2000	600	5000
Max power(W)	610	850	1100	2300	610	5500
Rated voltage (V)	12/24/48	24/48	24/48	48/96	12/24/48	120/220
Start wind speed (m/s)	2.5	2.0	2.0	2.0	2.5	2.0
Rated wind speed (m/s)	12	11.5	12	11	12	11
Roto r diameter(m)	1.8	2.4	2.4	3.15	3.98	6.1
Suggested battery(V/ Ah)	12.8/100*2	12.8/150*2	12.8/200*2	51.2/50*3	51.2/100*2	51.2/100*4
Inverter(KW)	1	2	3.5	5	10	20
Security wind speed(m/s)			45
Wind direction adjustment			Automatic adjustment of windward direction
Braking method			Elect ro magnetism

Vertical Axis
Model ( Vertical Axis)	DT-800H	DT-1.5KH	DT-2KH	DT-3KH	DT-5KH	DT-10KH
Rated power(W)	0.8	1.5	2	3	5	10
Max power(W)	0.83	1.7	2.2	3.5	5.5	12
Rated voltage(V)	48	48/96	48/96	96/120	120/220	360
Start wind speed (m/s)	2.5	2	2	2	2	2.5
Rated wind speed (m/s)			12
Rotor diameter (m)	2	2.55	2.55	2.85	3.6	5.8
Suggested battery(V/ Ah)	24/100*2	51.2/100*2	51.2/100*2	51.2/100*4	51.2/100*2	51.2/100*4
Inverter(KW)	3.3	5.5	10	5	30	50
Security wind speed(m/s)			35
Braking method			Elect ro magnetic braking
Alternator			Three phase AC permanent magnet motor/ permanent magnet suspension generator

Battery
Model	DT-LF012100	DT-LF012200	DT-LF025100	DT-LF038100	DT-LF051100
Nominal Specification( Ah)	100	200	100	100	100
Nominal voltage(V)	12.8	12.8	25.6	38.4	51.2
Max charging votage(V)	14.6	14.6	29.2	43.8	58.4
Energy(KWh)	1.28	2.56	2.56	3.84	5.12
Max continuous discharge current(A)	100	200	100	50	50
Max continueus discharge current(A)	100	200	100	150	100
Max load energy(W)	1.28	2.56	2.56	5	5.12
Weight( Kg)	10.8	22	22	32	38
Cycle life( time)	>2000 cycles at 90% DOD up to 6000 cycles at 80% DOD
Charge temperature(ºC)	0~55
Discharge Temperature(ºC)	-20~60
Storage Temperature(ºC)	-10~50
Size LxWxH ( mm)	329*172*214	522*240*218	522*240*218	520*269*220	520*269*220

inverter
Model	DT-1KW	DT-2KW	DT-3KW	DT-5KW
Rated Power (KW)	1	2	3	5
Battery
Battery Voltage (V/DC)	12	24	24	48
Floating Charge Voltage (V/DC)	13.5	27	27	54
Overcharge Protection (V/DC)	16	32	32	64
Input
Voltage (V/AC)		230
Frequency Range( Hz)		50 /60 ( Auto sensing)
Ouput
AC Voltage Regulation		230
( Ball. Mode) (V/AC)
Surge Power(VA)	2000	4000	6000	10400 ( for 5 sec)
Efficiency ( Peak)	90%	93%	93%	> 95%
Waveform		Pure sine wave
Solar Charger & AC Charger
Maximum PV Array Power(KW)	0.6	1.2	1.2	5
PWM Range Operation  Voltage (V/DC)	16-22	32-44	32-44	120~430
Maximum PV Array	40	60	60	450
Open Circuit Voltage (V/DC)
Maximum Solar Charge Current(A)		PWM 50		80
Maximum AC Charge Current (A)	20	20	25	80
Maximum Efficiency		98%
Physical
Dimension, D*W*H ( mm)	355*250*122	355*250*122	363*297*107	471*303*147
Packing Size, D*W*H( mm)	400*320*190	400*320*190	424*390*193	471*303*147
Net Weight ( kgs)	5.4	6.15	7.8	12

Project Cases

 

About Us

PROCESS  TECHNOLOGY
Test chips                                                             Laser cutting                                               Chip sortinglpsum

                            String welding                                             Laminate                                                                           EL test
                             Iaminated                                                  Framing                                                  Connecting cables
                                      IV test                                                               Clean glass                                                                            Package
 

Our factory

Cheng Ming Metal Technology (Shandong) Co., Ltd. is a private enterprise who is focus on manufacturing, sales and international trade, specializing in the production of machinery and equipment, container folding houses, space capsule scenic area house, apple cabin, double wing expansion houses, high and low voltage switchgear, inverter control cabinet, power distribution cabinet, landscape storage integrated power supply solutions, and also specializing in the production and manufacture of tool carts, air wheel, solid wheel, PU foam wheel, castors and customized all kinds of household shelves, supermarket shelves, pharmacy shelves, storage shelves, hardware shelves and other metal products. As a  well-known enterprise, the factory was established over 20 years. With advanced technology at home and abroad we have developed a series of products which are favored by customers.

 

Packaging & Shipping